SYSTEM CONFIGURATION
Follow the instructions to configure the public address system with the UDE MX-800:
1. INPUT CONNECTIONS
2. OUTPUT CONNECTIONS
3. REMOTE CONTROL PANELS CONNECTIONS
The MX-800 allows the connection of up to 8 line audio inputs using RCA connectors. First of all connect
the different audio sources to the matrix or in case you have an expanded matrix system, make sure you
connect the audio sources to the MASTER matrix only.
Up to 2 paging desks (MX-801) can be connected to the matrix even if we are talking about an expanded
matrix system. Connect them using the RJ45 connectors and if the distance between them is higher
than 45 meters you must use a power supply for the paging desk.
Finally, the audio matrix includes a microphone input using XLR connector (MIC1) on the rear part of the
device. Only one microphone can be used even if there is more than one matrix interconnected. This
microphone allows the system to provide a configurable priority input.
The MX-800 matrix allows the connection of up to 8 outputs. In case of an expanded matrix system the
possible outputs increase up to 32. The audio output is connected using a terminal black labeled as
“OUTPUT”.
The MX-800 matrix allows the connection of up to 8 remote control panels. In case of an expanded
matrix system, the system enables the connection to up to 32 remote control panels.
The wiring is performed by using a FTP or UTP cable. Moreover, the remote control must be enabled by
activating the REMOTE WALL CONTROL switch at the rear panel of the matrix.
MX-800
6. Audio equalization
6. Audio equalization
5. General configuration
4. Slave matrix connections
3. Remote control panels connections
2. Output connections
1. Input connections
12
10
610.387A
rev.
2
