7. AUDIO OUTPUT
7.1 Audio output terminal
7.2 Audio Gain
7.3 Bass and Treble
7.4 Paging desk (PAGE)
7.5 Remote control panel (MX-888)
7.6 Enable/disable switch
7.7 Remote source gain
7.8 Remote source for MX-888
Each zone has its individual terminal audio output for audio connection. For example with
a Power Amplifier.
The zone gain can adjust the audio volume of the zone or audio output. If the line 8 priority
is activated, then the audio gain will be disabled.
An audio output bass and treble adjustments are provided in the rear part:
LF: Bass adjustment.
HF: Treble adjustment.
Volume control for the paging desk (MX-801) signal for the specific zone.
The MX-800 matrix enables the possibility of connection up to 8 remote control panels
(MX-888). By using the existing RJ45 connector for each matrix input, a remote control
panel may be connected to each output by using an FTP or UTP cable.
Once the remote control MX-888 is connected to the RJ-45 port, each remote control
should be enabled with the proper switch.
Caution! Only activate the MX-888 when the remote control is connected.
This adjustment is used to control the remote source's gain. This will provide an
independent adjustment for each zone.
Each zone can have a level remote source assigned to it. It is designed like this in order to
enable users who do not want to use the local line input of the remote panels to have the
possibility of choosing a remote source for only that zone. Once the MX-888 is linked with
the matrix, the remote source can be selected by choosing channel “L”.
1. RS-485B
2. RS485 A
3. NC
4. GND
5. +24V
6. +24V
7. Audio +
8. Audio -
MX-800 REAR PANEL
RJ45
MX-888
1 2
3 4 5 6
J1
LINE INPUT
ON
SOURCE
UP
MUSIC
LEVEL
MIC
SOURCE
LEVEL
2
3
4
5
0
1
6
7
8
10
9
2
3
4
5
0
1
6
7
8
10
9
2
3
4
5
0
1
6
7
8
10
9
SOURCE
DOWN
REMOTE CONTROL
1
3
2
4
5
7
6
8
1
2
3
MIC
MX-888
WZ-5
EXTERNAL
POWER SUPPLY
24 V
GND
It is required only if the distance
between the remote panel (MX-888)
and the matrix (MX-800)
is higher than 50 meters.
MX-800
ZONE
1
dB
GAIN
REMOTE
WALL CONTROL
HF
LF
0V
1
+
3
-
2
PAGE
GAIN
dB
dB
+
3
dB
OUTPUT
DISABLE
ENABLE
REMOTE SOURCE 1
0V
1
-
2
1.5V/600
300mV-1.1V/10K
Ω
dB
ZONE
1
dB
GAIN
REMOTE
WALL CONTROL
HF
LF
0V
1
+
3
-
2
PAGE
GAIN
dB
dB
+
3
dB
OUTPUT
DISABLE
ENABLE
REMOTE SOURCE 1
0V
1
-
2
300mV-1.1V/10K
Ω
dB
7
7.1
7.2
7.3
7.5
7.4
7.8
7.6
7.7
1.5V/600
12
9
610.387A
rev.
2
