MX-800 FRONT PANEL
The LED display indications are:
A. Buttons for source selection.
Buttons “Source Up” and “Source Down” enable the audio source selection for each output. The display shows the
selected source number at all times.
Press Source Up or Source Down and once the display shows the desired audio source, press the ENTER button to
confirm all system changes. Otherwise the audio source selection will return to its previous selection after 10 seconds.
When the remote control panel (MX-888) is connected, the source selection buttons from the MX-800's front
panel will be disabled.
A dual digit display shows the audio source selection of each output.
The orange page busy LED will remain switched on to indicate that the paging desk (MX-801) is broadcasting to that
specific zone.
The MIC1 LED with priority will remain switched on in order to indicate that the MIC1 input has the highest priority against
any other input.
Every paging zone (audio output) has an individual MIC 1 volume control.
The music volume control for each paging zone. If the MX-800 audio matrix has a remote control (MX-888) connected, the
music volume control will not work
The master volume control enables the output gain adjustment for each zone of the MX-800 matrix. If the priority of this
zone is activated, this control will not be able to adjust the volume neither for the MX-801 paging desk nor the line remote
source number 8.
Caution!
B. LED display.
C. Page busy LED
D. Priority indicator
E. MIC 1 control volume
F. Music volume control
G. Master volume control
L1
L2
L3
L4
L5
L6
L7
L8
L
OF
Line Input number 1
Line Input number 2
Line Input number 3
Line Input number 4
Line Input number 5
Line Input number 6
Line Input number 7
Line Input number 8
Remote (line or microphone)
No selection
MX-800
MUSIC
MASTER
MIC1
2
2
2
3
3
3
4
4
4
5
5
5
0
0
0
1
1
1
6
6
6
7
7
7
8
8
8
10
10
10
9
9
9
SOURCE UP
SOURCE DOWN
PAGE BUSY MIC1
PRIORITY
B
A
C
A
D
F
E
G
ZONE
5
ZONE 1
ZONE 8
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
MONITOR
12
2
610.387A
rev.
2
