IPU-100P
BEEPER function:
Output Bass (Gain):
Example:
+0dB (mín.)
+15dB (max.)
Output Bass (Cut-off Frequency):
Example:
20Hz (mín.)
150Hz (max.)
Output Treble (Gain):
Example:
-12dB (max atenuation)
+0dB (default)
+10.5dB (max gain)
Output Treble (Cut-off Frequency):
Example:
1kHz (mín.)
8kHz (Máx.)
DESK.MIC IN Volume (format: XXX):
Example:
070 (min.)
090
127 (Max.)
EXT.MIC IN Volume (format: XXX):
Example:
010(min.)
090
128 (Max.)
TM OUT Activation Mode:
Activate the acoustic buzzer.
OFF (as Factory Default).
ON
Filter can be used to supplement the low frequency response, from +0dB (default set) to +15dB.
Filter cut-off frequency for supplement low frequency response.
Filter can be used to attenuate/supplement the high frequency response, from -12dB to +10.5dB.
Filter cut-off frequency for attenuate/supplement high frequency response.
Select between 070 and 127, the gain level to be applied to audio from the desk control IPU-100P connected to the IPU-100. This
configuration parameter can only be used in IPU-100P modeAlways use a 3-digit format.
Select between 010 and 128, the gain level to be applied to audio from the external microphone of the desk control (IPU-100P) connected
to the IPU-100 (CM-23 is the recommended microphone). This configuration parameter can only be used in IPU-100P mode. Always use
a 3-digit format.
There are few input calls (depending on the extension) that allow the activation of this mode:
- OFF.
-Any incoming call:Any incoming call with the server specifications will activate the TM OUT.
- Only voice calls: Only incoming calls from desk control (IPU-100P), will activate the TM OUT.
SERVER SPECIFICATIONS
2500
2999
4000
4999
Codifier extension between
and
, activate the TM OUT in the decoder.
All extensions between
and
will activate the decoder TM OUT
User Manual - IPU-100P
21
610.462A
Rev. 0
4.- DEVICE CONFIGURATION (WEBSERVER)
28
