IPU-100P
DC IN
I / O
MIC
IN
IN
OK
OUT
OUT
FAIL
FAIL
AUDIO
DATA
LINK
DEVICE
17
16
15
10
12
14
9
11
8
13
REAR
2
3
1
FRONT
MESSAGE
SPEECH
USB
FAULT
ON
IPU-100P
4
5
6
7
3.- FRONT VIEW / REAR VIEW
6
5
4
3
2
1
8
7
9
10
12
13
11
14
MICROPHONE.
.
Gooseneck microphone. Length: 300mm
TOUCHSCREEN.
10 zone touch- buttons per page ready to broadcast public address message.
LED FAULT
. LED is disabled.
LED AUDIO IN
. LED is disabled.
LED MESSAGE
. LED is disabled.
PTT BUTTON
. A push-to-talk (PTT) button to start the call when at least one zone is selected.
LED LINK OK
. This indicator is activated when exists a right data transmission with IPU-100 or IPU-1025.
LED DATA IN
. This indicator shows data modulation sent to IPU-100P.
LED DATA OUT
. This indicator shows data modulation sent from IPU-100P .
LED AUDIO OUT
. This indicator shows audio modulation from the gooseneck or external microphone.
LED FAIL DEVICE
. This indicator is activated when there is a connection problem with IPU-100 or IPU-1025.
LED LINK FAIL
. This indicator is activated when exist a wrong data transmission with IPU-100 or IPU-1025.
LED ON
. This indicator shows the equipment is properly powered and main application is running.
USB CONNECTOR
. The USB connector allows the firmware update.
CONTROLS, CONNECTORS AND INDICATORS
Remember!
If you experience problems with the LED AUDIO OUT, and never turn on, contact the technical staff to guarantee the right operation.
Remember!
If you experience problems with the LINK FAIL, so if it ever turns on sporadically, then it is recommended to reboot the IPU-100P
and IPU-100 or IPU-1025 to solve the communication problem between them. If the problem is no solve it, contact the technical
staff of the installation.
Remember!
If you experience problems with the DEVICE FAIL, so if it ever turns on sporadically, then it is recommended to contact with your
local network administrator (LAN).
User Manual - IPU-100P
4
610.462A
Rev. 0
28
