Installing
the Security System
Page 4 | August 17, 2010
To install the security system in a customer premises:
A.
Setting up the Router
1.
Ensure the customer premises have access to the Internet.
2.
Reset the home network router.
Note:
Do this, also, if you are restarting the installation process after having established the
connection between the TouchScreen and the router.
B.
Installing the TouchScreen
Note:
To mount the TouchScreen on a wall, perform the procedure described on page 136.
1.
Remove the TouchScreen from its
packaging.
2.
Use a P1 Phillips screwdriver to remove the
(1) screw from the battery cover of the
TouchScreen, and detach the cover.
The 4 volt lithium polymer battery is wrapped and
unconnected in the battery compartment of the
TouchScreen.
3.
Unwrap the battery from its packaging and install it in the battery compartment.
4.
Position the battery and cables inside
the battery compartment so the
cables lie along the top of the battery
as shown in the illustration to the
right.
5.
Align and connect the battery’s pins
to the battery connector so that the
wire order is (left-to-right) RED,
YELLOW, BLACK.