AeroCut nano+ OPERATION MANUAL
32
17
FLEX MODE input error 2
Make sure for the first cut line must be
0.785” or shorter from the edge of the
paper. If you want to cut off 0.785” or
more, please cut off 0.785” or less at
first and then cut off again and again.
If you try to move the slitter cut line at
1.85” or more position, the slit will be
ejected on Paper ejection table instead
of waste box.
18
FLEX MODE input error 4
Back margin error.
Correct the back margin to fit in the
value specified below.
