AeroCut nano+ OPERATION MANUAL
24
③
SIDE
BLOW
Default
Easy to feed
Reduce skew
１ ２ ３ ４ ５ ６ ７ ８ ９ １０
Reduce double feed
Thin paper might be bent and fed. In this case,
turn down the side blower.
Empty feed may occur when paper is heavy. In such cases, turn up the blower.
Papers with statics may cause double paper feed. In such cases, turn up the blower.
BLOW- SIDE will be turned off when the value is 0.
④
Air blow adjustment
⑤
PAPER FEED WORK TIME adjustment
Default
Reduce double feed
Reduce skew
0.0 1.0 2.0 3.0 4.0 5.0
Reduce double feed
Reduce skew
Default
LONG
BLOW
SHORT
BLOW
BLOW
OFF
0.5 sec. is the default setting. Paper fed work time can be adjusted with a fraction of 0.1s.
