Ublox TOBY-L2 series Скачать руководство пользователя | Manualshive

Страница: 39 / 164

background image

TOBY-L2 and MPCI-L2 series - System Integration Manual

UBX-13004618 - R28

System description

Page 39 of 164

1.9

Data communication interfaces

TOBY-L2 and MPCI-L2 series modules provide the following serial communication interface:



USB interface: High-Speed USB 2.0 compliant interface available for the communication with an
external host application processor, for AT commands, data communication, FW upgrade by
means of the FOAT feature, FW upgrade by means of the u-blox EasyFlash tool and for diagnostic
purpose (see section

for functional description)

TOBY-L2 series modules additionally provide the following serial communication interfaces:



UART interface: asynchronous serial interface available for the communication with an external
host application processor, for AT commands, data communication, FW upgrade by means of the
FOAT feature (see section

for functional description)



DDC interface: I

2

C bus compatible interface available for the communication with external I

2

C

devices as an audio codec (see section

for functional description)



SDIO interface: Secure Digital Input Output interface available for the communication with an
external u-blox Wi-Fi module (see section

for functional description)

1.9.1

Universal Serial Bus (USB)

1.9.1.1

USB features

TOBY-L2  and  MPCI-L2  series  modules  include  a  High-Speed  USB  2.0  compliant  interface  with
maximum data rate of 480 Mb/s, representing the main interface for transferring high speed data
with  a  host  application  processor:  the  USB  interface  is  available  for  AT  commands,  data
communication,  FW  upgrade  by  means  of  the  FOAT  feature,  FW  upgrade  by  means  of  the  u-blox
EasyFlash tool and for diagnostic purpose.
The  module  itself  acts  as  a  USB  device  and  can  be  connected  to  a  USB  host  such  as  a  Personal
Computer or an embedded application microprocessor equipped with compatible drivers.

The USB_D+ / USB_D- lines carry the USB serial bus data and signaling, providing all the
functionalities for the bus attachment, configuration, enumeration, suspension or remote wakeup
according to the Universal Serial Bus Revision 2.0 specification

☞

The VUSB_DET functionality is not supported by all the TOBY-L2 modules product versions: the
pin should be left unconnected or it should not be driven high by any external device, because a
high logic level applied to the pin will represent a module switch-on event (additional to the ones
listed in section

) and will prevent reaching the minimum possible consumption with power

saving enabled.

☞

The VUSB_DET pin is not available on MPCI-L2 series modules.

The USB interface is controlled and operated with:



AT commands according to 3GPP TS 27.007

, 3GPP TS 27.005

, 3GPP TS 27.010



u-blox AT commands

☞

For the complete list of supported AT commands and their syntax see u-blox AT Commands
Manual

TOBY-L2 and MPCI-L2 modules provide by default the following USB profile with the listed set of USB
functions:



1 RNDIS for Ethernet-over-USB connection



1 CDC-ACM for AT commands and data communication

«
...
37
38
39
40
41
...
»

Содержание TOBY-L2 series





































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TOBY-L2 series

Бренд: KELCO Страницы: 36

Бренд: Ohsung Electronics Страницы: 18

Бренд: Barco Страницы: 6

Бренд: Gascat Страницы: 32

Бренд: Oldham Страницы: 32

Бренд: H3C Страницы: 14

Бренд: Jedia Страницы: 12

Бренд: JED Micro Страницы: 10

Бренд: JCM Technologies Страницы: 2

Бренд: Raypak Страницы: 24

Бренд: J+J Страницы: 91

Бренд: Xilinx Страницы: 2

Бренд: Ziton Страницы: 28

Бренд: Unico Страницы: 164

Бренд: DANIEL Страницы: 48

Бренд: Panasonic Страницы: 8

Smart Control Panel 880RGD

Бренд: Raynor Страницы: 4

SAE 07.2 Series

Бренд: AUMA Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды