NORA-B1 series - System integration manual
UBX-20027617 - R02
Regulatory information and requirements
Page 47 of 58
C1-Public
6.9
Integration checklist
The following checklist can be used to get an overview of the requirements of each market. It is in no
way a complete list of all actions required but should cover the essentials of integrating a NORA-B1
radio module.
General requirements
The SWD interface cannot be accessed by an end-product user.
Specific to the European market
The EIRP. of the end-product is measured to be within the applicable limit.
A Class-2 limited power source is used to supply the module.
A Declaration of Conformity has been created.
Specific to the US and Canadian markets
If 802.15.4 is used, the radio channel 26 has been disabled and end-product users cannot enable
it.
The fundamental and out of band emissions of the end-product has been measured and complies
with the applicable limits.
An SDoC has been created, or an accredited test lab has been used to certify the end-product.
The end-product labelling requirements are fulfilled.
The end-product documentation requirements are fulfilled. The necessary legal statements are
included at a prominent location in the user guide.
Specific to the Japanese market
If applicable, the product fulfills the 48-bit addressing requirements.
The end-product labelling requirements are fulfilled.
A copy of the NORA-B1 Japan Radio Certificate has been included in the end-product technical
documentation
Specific to the Taiwanese market
The end-product labelling requirements are fulfilled.
Specific to the South Korean market
The end-product labelling requirements are fulfilled.
The end-product user manual requirements are fulfilled.
Specific to the Brazilian market
The end-product labelling requirements are fulfilled.
The end-product user manual requirements are fulfilled.
Specific to the Australian and/or New Zealand markets
The end-product labelling requirements are fulfilled.
A compliance folder containing all the relevant compliance test reports is created and available.
Specific to the South African market
The end-product labelling requirements are fulfilled.
