C099-F9P - User guide
UBX-18063024 - R12
Firmware update
Page 26 of 40
C1-Public
7
Firmware update
This section shows how to update the GNSS and Wi-Fi/Bluetooth modules’ firmware, if required.
The board is delivered with the latest versions of firmware running on the ZED-F9P and ODIN-W2
modules. However, newer versions may become available during the lifetime of the product.
7.1
ZED-F9P firmware update
This section shows how to update the firmware and re-enable the configuration settings required for
the C099-F9P. The user has two possible serial communication channels to update ZED-F9P: UART1
and USB2.0 ports.
To update the ZED-F9P, connect to u-center via USB to the COM port identified as the ZED-F9P and
poll MON-VER to view the installed firmware: see Figure 14 for the Device Manager COM port view. To
download a new firmware follow the sequence detailed below.
Figure 28: MON-VER poll response for a receiver with firmware version HPG 1.10
To begin updating the firmware, select
Tools
>
Firmware Update
…
Figure 29: Selecting u-center Firmware Update mode
The following
Firmware image
update window will appear:
Содержание C099-F9P-0-03
