Antenna Compatibility
The airFiber AF‑4X radio is designed for use with the following
airFiber X antenna models:
• AF‑5G30‑S45
• AF‑5G34‑S45
1
The AF‑4X can also operate with the following RocketDish
™
antenna models:
• RD‑5G30
2
• RD‑5G34
2
Installation Requirements
• Clear line of sight between airFiber radios
• Clear view of the sky for proper GPS operation
• Vertical mounting orientation
• Mounting point:
• At least 1 m below the highest point on the structure
• For tower installations, at least 3 m below the top of
the tower
• Ground wires – min. 10 AWG (5 mm
2
) and max. length:
1 m. As a safety precaution, ground the airFiber radio to
grounded masts, poles, towers, or grounding bars.
WARNING:
Failure to properly ground your
airFiber radio will void your warranty.
• (Recommended) 2 Outdoor Gigabit PoE surge protectors
Note:
For guidelines about grounding and lightning
protection, follow your local electrical regulatory
codes.
• Outdoor, shielded Category 6 (or above) cabling and
shielded RJ‑45 connectors are required for all wired Ethernet
connections.
1 Check your local/regional regulations for the maximum antenna gain
allowed for your application.
2 Requires Universal Bracket (included) or AF‑5G‑OMT‑S45 Conversion Kit
(not included).
www.4Gon.co.uk [email protected] Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299
