Installation Overview
We recommend that you configure your paired AF‑4X radios
before site installation. The overview below summarizes the
installation procedure, and the subsequent sections provide
detailed installation information.
• Connect the airFiber PoE Adapter to the DATA port, and
connect your computer to the MGMT port.
• Configure the AF‑4X.
• Install a ground wire and mount the AF‑4X on an
airFiber X or RocketDish antenna.
• At the installation site, install the airFiber X or RocketDish
antenna with the mounted AF‑4X radio (see the antenna’s
Quick Start Guide for installation instructions).
• Secure the ground wire and mount the GPS antenna.
• Establish and optimize the RF link.
Connecting Power over Ethernet
3. Lift the release latch on the bottom of the AF‑4X and slide
the Port Cover off.
www.4Gon.co.uk [email protected] Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299