6. Configure the Basic Wireless Settings:
a. For one AF‑4X, select Master as the Wireless Mode. For
the other AF-4X, keep the default, Slave.
b. Enter a name in the Link Name field. This should be the
same on both the Master and the Slave.
c. If needed, change the Channel Bandwidth, (Master) Duty
Cycle, Output Power and/or Maximum Modulation Rate
settings.
7. Configure the Frequency Setting. The selected Frequency
must be the same on both airFiber radios.
8. Configure the Wireless Security:
a. Select the AES Key Type, HEX or ASCII.
b. For the Key field:
‑
HEX
Enter 16 bytes (eight, 16‑bit HEX values: 0‑9, A‑F,
or a‑f). You can omit zeroes and use colons, similar to
the IPv6 format.
Note:
The airFiber Configuration Interface supports
IPv6 formats excluding dotted quad and “::”
(double‑colon) notation.
‑
ASCII
Enter a combination of alphanumeric
characters (0‑9, A‑Z, or a‑z).
9. Click Change and then click Apply.
www.4Gon.co.uk [email protected] Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299
