Ubert FF Series, Руководство пользователя

Страница: 7 / 31

Important References Page 7
printed: 06/2020 Subject to change!

:FFUserManual.docx
2.5.8 Maintenance, Trouble Shooting
• All prescribed adjustment-, maintenance- and service works must be carried out by
an authorized service technician on a regular basis.
• Before starting these maintenance- and service works the personnel must be clearly
informed.
• Pull out the plug before maintaining, inspecting and repairing is performed.
• Make sure that all loose screw connections are fixed and secured again.
• Check all safety devices and their proper function carefully at the end of all mainte-
nance-, service and repair works.
2.5.9 Technical amendments to the appliance
• No amendments, changings or reconstructions to the appliance are allowed to be
carried out without the written permission of the manufacturer. Never weld on load-
bearing parts of construction.
• All reconstructions do require a written permission of the manufacturer.
• Improper parts have to be changed immediately.
• Only use original spare parts.
• If you use spare parts of a third party, we cannot take over responsibility of their safe
construction and of any proper use in our appliances. All possible damages caused
by the use of improper parts will not be covered by the manufacturer.
• In case of reconstructions which impair the supply of air for combustion, the function
of the unit has to be examined again.
2.5.10 Cleaning and waste disposal
All matters and materials should be used only in accordance with their purpose. Used
materials, especially those for lubricating and cleaning must be disposed in accordance
with the valid regulations. Only use detergents which are in accordance with the food
hygienic regulations, environmental regulations and the regulations issued by your local
authorities.