Uberhaus MPG-10CRN1-BH9, Руководство пользователя

Страница: 8 / 27

OPERATING INSTRUCTIONS
Other features
In the case of a power outage or interruption,
the unit will auto matically re-start, in the
settings as used, after the power is restored.
Power Outage
After the unit has stopped, it can not be restarted
in the first 3 minutes. This is to protect the unit.
Operation will automatically start after 3 minutes.
Wait 3 minutes before resuming operation
The louver can be adjusted automatically .
Adjust the air flow direction automat ically
(Fig.4):
When the Power is ON, the louver opens fully.
Press the SWING button on the panel or
remote controller to initiate the Auto swing
feature.
The louver will swing up and down
automatically.
Please do not adjust the louver manually.
Air flow direction adjustment
Fig.4
SLEEP operation
Press this button, the set temperature will increase
O O
(cooling) or decrease (heating) by 1 C/2 F in 30
minutes.The set temperature will then increase
O O
(cooling) or decrease (heating) by another 1 C/2 F
after an additional 30 minutes. This new temper-
ature will be maintained for 7 hours before it returns
to the originally selected temperature. This ends
the Sleep mode and the unit will continue to ope-
rate as originally programmed.
NOTE: This feature is unavailabe under FAN or
DRY mode.
Swing automatically
panel will illuminate to indicate it received the
signal.It will continue to send this signal until
the feature is deactivated by pressing the
Follow Me button again. If the unit does not
receive any Follow Me signal for 7 minutes,
the unit will beep to indicate
the Follow Me
mode has ended. The display on the remote
control indicates the temperature
at the
remote ONLY.
8