Uberhaus MPG-10CRN1-BH9, Руководство пользователя

Страница: 10 / 27

INSTALLATION INSTRUCTIONS
Installation in a double-hung sash
window
1. Cut the foam seal A (adhesive type) to the proper length and
attach it to the window stool. Fig.8.Then cut the foam seal B
to the proper length and place it on the above foam seal A.
Fig.9
2. Attach the window slider kit to the foam seal B. Adjust the
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the foam seal B. Fig.9
3. Cut the foam seal (adhesive type) to the proper length and
attach it on the top of the window kit. See Fig.10
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window
sash. See Fig.11.
Foam seal A
(adhesive type)
Foam seal
Fig.8
Fig.9
Fig.10
Fig.11
Window kit
Window stool
26.5 ~ 48
Window kit
Window stool
foam seal B
foam seal B
10