Uberhaus MPG-10CRN1-BH9, Руководство пользователя

Страница: 11 / 27

INSTALLATION INSTRUCTIONS
Installation in a sliding sash window
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window frame. See Fig.12.
2. Attach the window slider kit to the window stool. Adjust the
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window stool. See Fig.13.
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the left of the window. See Fig.14.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the right of the window sash and
outer window sash. See Fig.15.
Foam seal
Foam seal A
(adhesive type)
Fig.12
Fig.13
Fig.14
Fig.15
Window
panel
26.5 ~ 48
Foam seal
11