Ubee Interactive
Using the VPN Option
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
73
Address group
type
Configures the local network that will be protected by the IPsec VPN located on your device’s
LAN side. Choose the local address type:
IP Subnet, to protect the whole subnet (default setting).
Single IP address, to protect a single PC.
IP address range, to protect several PCs.
Subnet
Defines the subnet.
Mask
Defines the subnet mask.
Identity type
Defines the identity type for this device:
Automatically use WAN IP address
IP address (default setting)
Fully qualified domain name (FQDN)
Email address (USER FQDN)
In Main mode (see
IKE negotiation mode on page 75
), the identity type and content are
encrypted to provide identity protection. The VPN concentrator can distinguish up to 30 different
incoming SAs that have dynamic WAN IP addresses and connect from remote IPsec routers.
You can select between five encryption algorithms (DES, 3DES, AES-128, AES-192 and AES-
256), two authentication algorithms (MD5 and SHA1) and three key groups (DH1 and DH2,
DH5) when you configure a VPN rule. The identity type and content act as an extra level of
identification for incoming SAs.
In Aggressive mode (see
IKE negotiation mode on page 75
), the VPN concentrator identifies
incoming SAs by identity type and content (which are not encrypted) to distinguish between
multiple rules for SAs that connect from remote IPsec routers that have dynamic WAN IP
addresses.
Identity
Defines the value corresponding to the selected Identity type.
Remote endpoint settings
Address group
type
Defines the address group type:
IP Subnet – protects the entire subnet.
Single IP address – protects a single PC.
IP address range – protects several PCs.
Subnet
Defines the subnet.
Mask
Defines the subnet mask.
Identity type
Defines the identity type to identity this device by:
Automatically use WAN IP address
IP address
Fully qualified domain name (FQDN)
Email address (USER FQDN)
Identity
Defines the value corresponding to the selected identity type.
Network address
type
Defines the network address type:
IP address, usually suitable for static public IP address (default setting).
Fully Qualified Domain Name (FQDN), usually suitable for dynamic public IP address.
Label
Description