Ubee Interactive
Checking Device Package Components
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
5
1.3.1
Understanding the Device Front and Rear Panels
The following images represent the device front and rear panels. Connection descriptions
are provided in section 1.3.2., and LED descriptions are provided in section 1.3.3.
1.3.2
Understanding the Device Connections
The following table describes the connections on the device.
Item
Description
RESET
Restores the settings of the device including wireless and custom gateway settings.
Use a pointed object to push down the reset button. To power cycle the device, hold for
less than 5 seconds. To reset the device to factory defaults, hold for more than 5
seconds.
TEL1 / TEL2
Connects to standard telephones using an RJ11 cable. Telephone service must be
enabled by your service provider.
ETHERNET 1-4
Connects to Ethernet devices such as computers, gaming consoles, and/or
routers/hubs using an RJ45 cable. Each Ethernet port on the back panel of the device
has 2 LEDs to indicate its status when an Ethernet device is connected.
Front Panel
Rear Panel
