Ubee Interactive
Using the Diagnostics Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015
27
Topics
See the following topics:
Using the Ping Option on page 27
Using the Traceroute Option on page 28
4.4.1
Using the Ping Option
Use the
Ping
utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm the size of data sent is the same as
the size of data received.
Steps
To test connectivity between devices:
1. Click
Status
from main menu.
1. Click
Diagnostics
from the left side menu.
2. Choose
Ping
from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click
Start Test
. Field descriptions are listed below the screen example.
Label
Description
Utility
Provides a drop-down menu to choose Ping or Traceroute.
Ping Test Parameters
Target
Defines the IP address to which you want to send a ping.
