UBCO 2x2 Dual-Use 2018, Руководство пользователя

Страница: 54 / 57

51
Replacing Brake Pads
The 2×2 includes front and rear hydraulic disk
brakes, operated by levers on the handlebars.
Ensuring your brake pads are in good condition
is critical to your safety. Check the brake pads
regularly, especially when a lot of heavy braking
has occurred.
Replacement brake pads are Tektro D40.11 and are
available from UBCO Ltd.
Brake rotors get hot during braking. Allow
sufficient time for brakes to cool before
touching or doing any maintenance.
To replace the brake pads:
a. Unscrew the pin on the top of the calliper body
with a number 3 Allen key, remove the end clip
and pull the pin out.
b. Remove the brake pads from the top of the
calliper and discard. Guide new brake pads in,
from the top of the calliper, until the holes line
up. Do not touch the pad surface with your skin.
c. Re-install the fastening pin and tighten with the
Allen key. Replace the end clip.
a.
b.
c.