UBCO 2x2 Dual-Use 2018, Руководство пользователя

Страница: 29 / 57

26
Kickstand
The 2×2’s kickstand has an auto-retract design
so the 2×2 cannot be ridden with the stand down,
reducing the risk of the stand catching.
It’s important that you keep body parts clear of the
stand when removing weight from the stand.
To engage the stand:
a. Use your foot to rotate the stand down to the
ground until it reaches the down stop.
b. While maintaining the pressure on the stand
with your foot, lean the 2×2 over until the
weight of the 2×2 is on the stand.
c. Ensure the weight of the 2×2 is resting on the
stand and that the stand is secure.
Retracting the stand:
a. Simply remove the weight of the 2×2 off the
stand and keep body parts clear of the stand
− the kickstand spring will cause the stand to
retract with force.
b. Or, use your foot to help guide the stand back
to its stowed position.
Adjustable Suspension
Front:
The front forks have adjustable rebound
dampening controls that control the rate the
suspension re-extends after an impact.
This feature can be adjusted on the top right-hand
side of the fork crown. Twist the dial clockwise to
slow the rebound; counter-clockwise to speed it up.