U.S. Solid USSOILP1, Руководство по эксплуатации

Страница: 5 / 20

For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com, or
call (800) 209-4177
III. Unpacking the Oil Press
Opening the Oil Press
First check whether there is damage due to transportation. Make sure the
aluminum heater cover stays close to pressing chamber. Otherwise clog-
ging will occur and no oil will come out!
As for the manufactured equipment: there may be discoloration or
unevenness in the surface of the pressing chamber. This is the normal
appearance of unique, wear-resistant metals and is normal with new
products.
Packing items include one manual, one wrench (for removing the pressing
chamber), one material hopper, one power cord, one oil cup (gift), one
slag net (gift) and one hard round brush (gift); consult the website for any
changes to gifts, as these can change without notice.
Parts of the Oil Press
Figure 1 shows the panel of switches. The switch on the far left can toggle
between cleaning and squeezing. The red switch is the power switch.
When on, the machine will be heating, or it can be turned off. The small
red button is overload protection. In the bottom right, there is a label high-
lighting the wattage of your machine.
Figure 1