USER GUIDE
Cleaning 2
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS •
MAINTENANCE
• SERVICE
U-
Line
Clear
Ice Machine Cleaner is used to remove lime
scale
and other mineral deposits. Refer to the following
steps to
initiate the self-cleaning cycle.
!
CAUTION
Never use anything
to force ice from the
evaporator. Damage
may result.
1. Turn the ice
machine off and
allow any ice to melt
off of the
evaporator.
2. Remove all ice from the storage bin.
3. Remove evaporator cover.
4. Remove the standpipe by lifting it up while using a
slight back and forth motion to loosen it from the drain
hole. The water in the reservoir will flow down the
drain.
5. Re-install the standpipe into the water trough.
6.
Clean the Interior Bin as follows:
• Dilute
1-2 oz. of Clear Ice Machine Cleaner into two
quarts of water.
• Using a sponge or cloth, clean interior of ice bin,
tubing and door. This cleaner will remove all mineral
deposits and other contaminants from the surfaces.
• Using a bottle brush, clean out the trough drain tube
and pump tubing where needed.
7. Turn unit on by pressing .
8. Place the unit into CLEAN mode by holding
for
5 seconds.
Evaporator cover
Standpipe
Evaporator
Water trough
Brush
NOTICE
Use only U-Line
Clear
Ice Machine Cleaner
(
80-55667-00
), available
for purchase from
u-line.com
or
your dealer. It
is a violation of
federal law to use this solution in
a manner
inconsistent with its labeling. Use of
any other
cleaner can ruin the finish of the
evaporator and
will void the warranty. Read and
understand all
labels printed on the package
before use.
27
