PAGE 10 OF 33
0819 IH-5819
BACKLIGHT
At startup, the backlight will automatically turn on
when the scale is in use. Enter this menu to change the
backlight setting.
1. Turn on the scale and press the
TARE
key
Tare
during
the self-test.
PO CAL
will be shown on the display.
PO CAL
2. Press the
TARE
key
Tare
until
P1ObFL
is shown on the
display.
3. Press the
ZERO
key
Zero
to enter the menu.
4. Press the
TARE
key
Tare
to change the setting.
• BK AU – Backlight automatically turns on when the
scale is in use.
• BK ON – Backlight is always on.
• BK OFF – Backlight is never on.
5. Press the
ZERO
key
Zero
to select the new setting.
6. Press the
TARE
key
Tare
to view additional menus or
press the
MODE
key
Mode
to exit the setup menu.
HI/LO LIMIT BEEPING SOUND
At startup, the beeping sounds are set to no sound. Enter
this menu to change the beeping sound setting.
1. Turn on the scale and press the
TARE
key
Tare
during
the self-test.
PO CAL
will be shown on the display.
PO CAL
2. Press the
TARE
key
Tare
until
P11 bP
is shown on the
display.
3. Press the
ZERO
key
Zero
to enter the menu.
4. Press the
TARE
key
Tare
to change the setting.
• Bep 1 – Beeping sounds between the limits.
• Bep 2 – Beeping sounds outside of the limits.
• Bep 0 – No beeping sounds.
5. Press the
ZERO
key
Zero
to select the new setting.
6. Press the
TARE
key
Tare
to view additional menus or
press the
MODE
key
Mode
to exit the setup menu.
DATE/TIME SET UP
Enter this menu to set the date and time.
1. Turn on the scale and press the
TARE
key
Tare
during
the self-test.
PO CAL
will be shown on the display.
PO CAL
2. Press the
TARE
key
Tare
until
P12 t
i
is shown on the
display.
3. Press the
ZERO
key
Zero
to enter the menu.
4. Press the
TARE
key
Tare
until the desired date format
is shown.
a. d-m-y – Day – Month – Year
b. y-m-d – Year – Month - Day
5. Press the
ZERO
key
Zero
to select the new date format.
6. Press the
TARE
key
Tare
to change the year, month
or date.
a. YY – Year
b. MMDD – Month & Day
c. HHMM – Hours & Minutes
7. Press the
ZERO
key
Zero
to select the setting to
change.
8. The active digit will start blinking. Press the
TARE
key
Tare
to change the blinking digit value.
Press the
UNITS
key
Units
to move to the next digit.
9. Press the
ZERO
key
Zero
to confirm.
10. Press the
MODE
key
Mode
.
11. Press the
TARE
key
Tare
to view additional menus or
press the
MODE
key
Mode
twice to exit the setup menu.
SETUP MENU CONTINUED
