background image

PAGE 4 OF 18 

0721 IH-1820VND

H-1820

4

    

 P3 ALL AROUND - PRESTO PALLET POSITIONER    

INTRODUCTION

The P3 All Around Pallet Positioner is a simple device that will automatically maintain a load at the 
ideal height for manual loading and unloading.  If a palletized load is placed on the unit, the unit 
gradually rises as boxes or parts are removed.  This automatically maintains the top of the load at 
the correct working height.

The unit may also be used for the reverse application.  An empty pallet may be placed on the P3 
(P3 All Around Pallet Positioner).  The unit gradually lowers as boxes or parts are added.  Again, 
this keeps the top of the load at the correct height.  Complete pallets may be loaded or unloaded 
using a stacker or fork lift. See Figures 5 and 6.

This manual contains information to help you to learn about the safe and proper installation, use, 
and upkeep of your P3.  Please be sure that this manual is available to anyone who uses or services 
the unit.

P3 units may be used in a wide variety of industrial settings.  The instructions in this manual are not 
necessarily all-inclusive, as Presto cannot anticipate all conceivable or unique situations.  

In the interest of safety, please read this whole manual carefully.  Be 
familiar with the contents of this manual before you install or use the 
P3 unit.  If you are not sure of the proper procedure to be followed, 
please call Presto Lifts for more information.

Presto’s product warranty is shown on the rear cover of this manual.  This instruction manual is not 
intended to be or to create any other warranty, express or implied, including any implied warranty of 
merchantability or fitness for a particular purpose, all of which are hereby expressly excluded.  As 
set forth more specifically in the product warranty, Presto’s obligation under that warranty is limited 
to the repair or replacement of defective components, which shall be the buyer’s sole remedy, and 
Presto Lifts shall not be liable for any loss, injury, or damage to persons or property, nor for any 
direct, indirect, or consequential damage of any kind.

Содержание H-1820



















Отзывы: