PAGE 12 OF 18
0721 IH-1820VND
H-1820
12
P3 ALL AROUND - PRESTO PALLET POSITIONER
OPERATING INSTRUCTIONS
(continued)
Loading Manually
Add boxes or parts in even layers until the pallet is full.
The unit will gradually lower the pallet until it reaches
the bottom. See Figure 2.
Removing Loads Manually
Remove boxes or parts in even layers until the pallet
is empty. The unit will gradually raise the pallet. See
Figure 3.
Operating Safely -- Manual Use
1. Never push the load off of the side of the unit. If you
do this, the frame of the unit may jump upward.
Figure 2. Loading Manually
Figure 3. Unloading Manually
Figure 4. Warning - Load and Unload in
Even Layers
WARNING!
Ensure that loading and unloading of the P3 All Around is done in even layers.
Loading or unloading a load on one side may cause the load to tip over and you
may be injured. This can also damage the unit. See Figure 4.
2. Never use the unit when anyone is sitting or riding on the turntable.
3. Do not try to use this unit with damaged or broken pallets. Broken pallets may have boards or nails which hang
down below the main part of the pallet. As the pallet is turned, these boards or nails may catch on the frame.
The pallet may stop turning suddenly and this can cause the load to shift. You may be injured and the unit may
be damaged. If the boards or nails on the bottom of the pallet extend down more than 1/8 inch, they will interfere
with the turning action.
4. Stay clear of the turntable when it is moving. As the pallet turns, a part of the load may rotate around and hit you.
5. Keep the area around the unit clean. Do not allow any dirt, debris, spilled oil, or excess grease to collect. These
materials may cause you to slip while the unit is operating and you may be injured.
