XPLR-HPG-1 - User guide
UBX-23000692 - R01
Getting started
Page 34 of 37
C1-Public
4.5
Assembling the enclosure
The C213 baseboard with mounted Click boards is designed to be inserted in a Takachi EXPF15-6-11
enclosure. To assemble the enclosure:
1.
Insert the C213 baseboard with all mounted Click boards into the lowest possible position level
of the bottom assembly (item 3). Be sure to include the 18650 battery and the SIM card in their
respective positions on the C213 baseboard and the 4G LTE 2 Click board
–
if needed. These
holders are not accessible once the enclosure is fully assembled.
2.
Fit the top assembly (item 2) on top of the bottom assembly (item 3)
3.
Assemble the back assembly (item 1) and the back frame (item 4) using the four screws (item 7)
4.
Assemble the front plexiglass surface (item 6) and front frame (item 8) using the four screws
(item 5)
hows the component parts of the enclosure.
Figure 27: Enclosure parts
shows how the C213 baseboard is seated in the bottom holder of the enclosure.
Figure 28: PCB placement in enclosure
