Error! No text of specified style in document. - System Integration Manual
CDMA-2X-11004-P1
Objective Specification
System description
Page 52 of 79
49.4
Approvals
Error! No text of specified style in document. modules have been or will be approved under the
following schemes:
CDG1
CDMA Development Group 1 Radio Conformance Testing
CDG2
CDMA Development Group 2 Inter-operability
Sprint Carrier
Certification
Verizon Carrier Certification
FCC Federal
Communications
Commission
IC
Industry Canada
49.4.1.1
Statement to be included in users guide - United States only
Radiofrequency radiation exposure Information: this equipment complies with FCC radiation
exposure limits prescribed for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm between the radiator and your
body.
49.4.1.2
Statement to be included in users guide – Canada only
The antenna used for the transmitter must be installed to provide a separation distance of at
least 7.87 inches (20 cm) from all persons.
L'antenne de l'émetteur doit être installé à une distance d'au moins 7,87 pouces (20 cm) de
toutes les personnes.
49.4.1.3
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by u-blox could void the user's authority to operate the equipment.
Manufacturers of mobile or fixed devices incorporating the Error! No text of specified style in
document. modules are authorized to use the FCC Grants and Industry Canada Certificates
of the Error! No text of specified style in document. modules for their own final products
according to the conditions referenced in the certificates.
The FCC Label shall in the above case be visible from the outside, or the host device shall
bear a second label stating for FW75: “Contains FCC Id XU9-FW75”
And for LISA C200 “Contains FCC Id XU9-LISAC200”
The IC Label shall in the above case be visible from the outside, or the host device shall
bear a second label stating for FW75: “Contains IC 8694A-FW75”
And for LISA C200 “Contains IC 8694A-LISAC200”
Canada, Industry Canada (IC) Notices
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Canada, avis d'Industrie Canada (IC)
Les changements ou modifications n'ont pas était expressément approuvés par la partie
responsable de la conformité, ils pourraient annulée l'autorité de l'utilisateur pour exploiter
l'équipement.
