JODY-W2 - System integration manual
UBX-18068879 - R14
Regulatory compliance
Page 69 of 84
C1 - Public
In accordance with 47 CFR § 15.19, the end product shall bear the following statement in a
conspicuous location on the device:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
ISED end product labeling
The ISED certification label of a module shall be clearly visible at all times when installed in the host
device; otherwise, the host device must be labeled to display the ISED certification number for the
module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar
wording expressing the same meaning, as follows: “Conta
ins transmitter module IC: 8595A-
JODYW263
”.
L’étiquette d’homologation d’ISED d’un module donné doit être posée sur l’appareil hôte à un endroit
bien en vue en tout temps. En l’absence d’étiquette, l’appareil hôte doit porter une étiquette sur
la
quelle figure le numéro d’homologation du module d’ISED, précédé des mots « Contient un module
d’émission », ou du mot « Contient », ou d’une formulation similaire allant dans le même sens et qui va
comme suit : « Contient le module d’émission IC: 8595A
-JODYW263».
The end product shall bear the following statement in both English and French in a conspicuous
location on the device:
Operation is subject to the following two conditions:
this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.
Son utilisation est soumise aux deux conditions suivantes:
Cet appareil ne doit pas causer d’interférences et
il doit accepter toutes interférences reçues, y compris celles susceptibles d’avoir des effets indésirables sur son
fonctionnement.
Labels of end products capable to operate within the band 5150
–
5250 MHz shall also include:
for indoor use only
Pour usage intérieur
seulement
When the device is so small or for such use that it is not practicable to place the statements above on
it, the information shall be placed in a prominent location in the instruction manual or pamphlet
supplied to the user or, alternatively, shall be placed on the container in which the device is marketed.
However, the FCC/ISED ID label must be displayed on the device as described above.
In case, where the final product will be installed in locations where the end-consumer is unable to see
the FCC/ISED ID and/or this statement, the FCC/ISED ID and the statement shall also be included in
the end-product manual.
5.5
NCC Taiwan compliance
Taiwan NCC Warning Statement
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設
計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干
擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信
或工業、科學及醫療用電波輻射性電機設備之干擾。應避免影響附近雷達系統之操作。
系統廠商應於平台上標示「本
產品內含射頻模組：
JODY-W2
字樣
。
Statement translation:
