-23-
-22-
3. Drawer kick-out drive signal
Output signal:
Output voltage: Approximately 24 V
Output current:
1A or less
2.2) Connectors
a. Interface Connectors
b. Power Supply Connector
Pin Number
Signal Name
c. Drawer Kick-out Connector (Modular Connector)
Drawer Kick-out Connector Pin Assignments
Pin Number
Signal Name
Direction
Refer to Interface explain.
This connector is used to connect the printer to an external power source.
Power Supply Connector Pin Assignments
1
+24 VDC
2
GND
3
NC
Shell
Frame GND
The pulse specified by ESC p or DLE DC4 is output to this connector. The
host can confirm the status of the input signal by using the DLE EOT, GS a,
or GS r commands.
1. Pin assignments: Refer to Table
2. Connector model: Printer side:
MOLEX 52065-6615 or
RJ11 telephone jack
User side:
6-position 6-contact
(RJ11 telephone jack)
1
NC
2
Frame GND
Output
3
NC
4
Drawer kick-out drive signal
Output
5
NC
6
NC
