3. Printer Interface and Connection
3.1) Connecting the Interface Cable
3.2) Connecting to a Cash Drawer
a. Before connecting/disconnecting the interface cable, make sure that power
to the printer and all the devices connected to the printer is turned off.
b. Connect the interface cable to the connector on the rear panel of the printer.
c. In the case of a serial interface, tighten the connector screws. In the case of a
parallel interface, fasten the connector clasps.
Important:
·
·
Make sure that the printer is turned off and unplugged from the AC outlet
and that the computer is turned off before making connections.
Do not connect a telephone line into the peripheral drive connector. Failure
to observe this may result in damage to the printer.
3.3) Connecting the AC Adapter
a. Connect the AC power cord to the inlet of AC adapter, and then connect the
power cord plug to a suitable electrical outlet.
b. Connect the adapter cable to power connector of printer; make sure the
printer power switch is OFF before making any connections.
c. Set the power switch as shown. The POWER lamp on the control panel will
light up.
CAUTION:
DO NOT USE ANY AC POWER ADAPTERS OTHER THAN SPECIFIED.
-9-
-8-
Plug the cable connector securely
into the printer's interface connector.
Attach the other end of the
cable to the computer