Tysso POP-650-i, Руководство пользователя

Страница: 5 / 133

iii
IMPORTANT SAFETY INFORMATION
Read following instructions carefully.

Use only parts, especially power adapter, recommended by the manufacturer; unapproved
parts may be hazardous.

Before plugging the power cord into the AC inlet of the power supply unit, make sure that
the voltage applied to the power outlet is within the specified range (100V ~240V).
Improper power source voltage range will cause damage to the power supply unit.

Power off the system and remove the power adapter while cleaning the system.

Before powering on the system, make sure all the peripherals are firmly installed.

Do not use the system near water, such as a bathtub, a washbowl, a kitchen sink, a laundry
tub, and a swimming pool. Do not expose the machine under direct sunlight, and keep it
away from any heat source.

Do not place the system on an unstable cart, stand or table. If the machine falls, it may injure
a person or cause serious damage to the appliance.

The system is equipped with a three-wire grounded plug with a third (grounding) pin. This is a
safety feature. If your outlet does not accommodate the three-wire plug, have an electrician
install a correct outlet, or use an adapter to ground the appliance safely. Do not leave out the
safety purpose of the grounded plug.

Do not allow anything to rest on the power cord. Do not locate the system where people may
walk on the cord.

Do not make the power outlet and extension cords overload. Overload can result in fire or
electric shock.

Do not push any object into the computer cabinet. Dangerous voltage points may be touched
and the parts may be shorted out resulting in fire or electric shock.

Do not attempt to service the system on your own. Opening or removing cover can expose
you to dangerous voltage or other hazards.

Power off the system before installing or removing non-PNP (plug and play) devices.

If any of the following situations occurs, unplug the systems from the power outlet
immediately and consult with a qualified service person:

1. The power cord or plug is damaged or frayed.
2. Liquid is spilled into the system.
3. The system is dropped or the cabinet is damaged.
When the system is not in use, cover the system and store it with care.
