The Control Solution is used to check and to ensure that the TysonBio SUPERB
Meter and TysonBio SUPERB Test Strip are working together properly and that you
are performing the test correctly.
When you are using your Blood Glucose Monitoring System for the first time.
When you are using a new batch of Test Strips.
Anytime you question the performance of the system, or on a regular basis to
ensure accuracy, e.g. once a week.
When you adjust your diabetic medication plans.
When your blood glucose test result is lower or higher than your normal level.
1.
2.
3.
4.
5.
Make sure the Control Solution is at room temperature
prior to testing.
Insert a TysonBio SUPERB Test Strip, white side face up,
Contact Bar’s end first, into the test port. The TysonBio
SUPERB Meter will turn on automatically.
All segments of the LCD display will appear, indicating that
the TysonBio SUPERB Meter is functioning properly.
A beep will sound and the code number will appear followed
by a flashing “ “ symbol. Be sure the code number on the
display matches the code number on the TysonBio SUPERB
Test Strip vial. If the code numbers do not match, code the
TysonBio SUPERB Meter by using Glucode Chip, accord-
ingly.
1.
2.
3.
4.
Note: Control Solutions are required but not supplied.
There are three Control Solutions at different desired range of aqueous glucose
(Low, Normal or High). Two levels of Control Solutions should be performed. For
more information about the Control Solution, please read your Control Solution
package insert.
To Perform a Control Solution test:
M
S
The Control Solution Test
When to perform a Control Solution Test
mg/dL
25
26
