TYROLIT Hydrostress TTE250 Series, Руководство по эксплуатации / Список запасных частей

Страница: 15 / 25

– 1 – – 1 –
x. CUTTING DEPTH
13
7
11
12
8
20
18 17 10 9
6 19
5 14 15
1
Main aSSeMBly
xi. REPLACEMENT PARTS LIST
the recommended cutting depth is 6mm below the cutting
table surface. to adjust the cutting depth, loosen the cutting
head adjustment handle and set it to the lowest position, so
that the blade is 6mm below the top of the table surface.
WARNING: Setting the blade too high may
cause the blade to grab the material being cut,
possibly causing injury to the operator and the
saw.
BLADE DIAMETER CUTTING DEPTH
250mm 60mm
4
3
2
16
Pos Art. No. Description
1 10985786 eoSM-420150 rail PlatforM aSSeMBly
2 10985678 eoSM-420002 taBle aSSeMBly
3 10985787 eoSM-420151 vertical arM (110v/50hZ)
10985788 eoSM-420152 vertical arM (230v/50hZ)
4 10985789 eoSM-420153 cuttinG head (110v/50hZ)
10985790 eoSM-420154 cuttinG head (230v/50hZ)
5 10985791 eoSM-420155 Blade Guard aSSeMBly
6 10985679 eoSM-420006 dia 5/8” outer flanGe
7 250mm cont. general purpose blade
8 10985680 eoSM-420007 d30 x 120l handle
9 10985681 eoSM-420008 SPrinG
10 10985682 eoSM-420009 SliP collar
11 10985683 eoSM-420010 interlocK waSher
12 10985792 eoSM-420156 water PuMP (110v/50hZ)
10985793 eoSM-420157 water PuMP (230v/50hZ)
13 10985684 eoSM-420012 M6x1.0x25l head hex Bolt
Pos Art. No. Description
14 10985685 eoSM-420013 M10 narrow waSher
15 10985686 eoSM-420014 Male M10 x 1.5 x 25l KnoB
16 10985687 eoSM-420015 M8 x 1.25 acorn nut
17 10985688 eoSM-420016 M8 narrow waSher
18 10985689 eoSM-420017 M8x1.25x35l croSS Screw
19 10985912 eoSM-PSv00004 5/8” - 11 hex nut
20 10985806 eoSM-420170 dia 1” inner flanGe
20 10987292 eoSM-420305 dia 1” inner flanGe 1/ -1.5
20 10987293 eoSM-420306 dia 1” inner flanGe 2/ -1
20 10987294 eoSM-420307 dia 1” inner flanGe 3/ -0.5
20 10985806 eoSM-420305 dia 1” inner flanGe 4/ 0
20 10987295 eoSM-420308 dia 1” inner flanGe 5/ 0.5
20 10987296 eoSM-420309 dia 1” inner flanGe 6/ 1
20 10987297 eoSM-420310 dia 1” inner flanGe 7/ 1.5