TYROLIT Hydrostress TBS510, Руководство по эксплуатации

Страница: 13 / 33

13/33
1.5.2. Electric power
1.5.2.1 Use only original fuses with the specified current rating! In case of malfunctions, turn off the
masonry band saws immediately! Electrical work may only be carried out by technical and
qualified personnel.
1.5.2.2 The machine's electrical equipment must be inspected/checked regularly. Faults such as loose
connections or damaged cables must be corrected immediately. The machine must be labelled so
that it cannot be started by others.
1.5.2.3 Carry out maintenance or repair work only when the machine is disconnected from the power
mains.
1.5.2.4 A voltage drop of more than 10% leads to damage of the electrical switches.
1.5.3. Dust
1.5.3.1 When working in close quarters, follow any applicable national guidelines!
1.5.3.2 The masonry band saw can be equipped for use in interior areas with a dust extraction.
1.5.4. Noise
1.5.4.1 Noise value (see 2.4)
1.6. Transport
1.6.1 Name expert instructors for the lifting process
1.6.2 Only use suitable transport vehicle with sufficient load capacity!
1.6.3 Secure loads reliably according to the regulations. Use suitable attachment points!
1.6.3 Lift the machine only according to the instructions in the operating manual and with proper lifting
gear! Observe the attachment points (crane eyes) for load lifting system.
1.6.3 Even when moving the machine only for a short distance, disconnect the machine from the power
source! Before restarting the machine, connect it to the power mains correctly!
1.6.4 When recommissioning, follow the operating manual!
1.6.5 Transport of the masonry band saw may only be carried out in transport position.