TYROLIT Hydrostress TBS510, Руководство по эксплуатации

Страница: 11 / 33

11/33
1.4.4. Operation
1.4.4.1 Refrain from working in any manner that is questionable in regard to safety!
1.4.4.2 Take measures to ensure that the masonry band saw is only operated in a safe, functional
condition!
1.4.4.3 At least once per shift check the machine for externally recognisable damage and deficiencies!
Any changes which occur (including operating behaviour) must be reported immediately to the
responsible post/person! If necessary, immediately stop the machine and secure it against restart!
1.4.4.4 Immediately stop and secure the machine in case of malfunctions! Immediately correct
malfunctions! Electrical work may only be carried out by qualified electricians.
1.4.4.5 Any contact with the rotating saw belt is prohibited.
1.4.4.6 If the saw belt tears, first wait until the saw belt stops before opening the side doors.
1.4.4.7 Cutting curved or uneven workpieces is only allowed if the workpiece lies flatly between the saw
table and stop, has a secure guide and must not additionally be held with the hands.
1.4.4.8 The masonry band saws may only be operated by one person.
1.4.4.9 Do not pull the power plug from the power source when power is on.
1.4.4.10 Reaching into the saw belt during cutting is prohibited. These works may only be carried out with
the saw belt at a standstill and the drive motor turned off.
1.4.4.11 After finishing work the saw belt must be released to take the tension off the bearings of the saw
belt wheels. Before starting work the saw belt must be tightened again.
1.4.5. Blockage of the masonry band saw
1.4.5.1 When the saw belt is blocked the machine must be switched off immediately.
1.4.5.2 Check the saw belt, saw belt wheels and the rubber coating on the saw belt wheels for damage.