TYROLIT
Hydrostress AG
Page 7
Ring saw HRH500
Personal protective clothing
Personal protective clothing
Residual risks
On the basis of residual risks, which are described in the following chapters, there is danger of
serious injuries.
Sharp edges
On coming in to contact with the tool there is a danger of serious cut injuries.
X
Do not touch tool when in operation.
X
Only touch a stationary tool when wearing gloves.
Flying diamond segments
X
Each time before use ensure that the blade guard is correctly fitted and undamaged.
X
Only begin sawing when no other person is in the danger area.
X
Ensure that the safe distance to the ring saw of 15 m is maintained.
X
Change the cutting ring when diamond segments break off.
Recoil
Due to incorrectly fitting the cutting ring or cutting unspecified materials the ring saw can sud-
denly recoil seriously injuring the operator.
X
Only cut materials that are permitted within the scope of intended application.
X
Do not place the cutting ring above the centre at a work piece corner.
Unintentional start up
X
Before operating ensure:
–
The switch handle with safety lock functions correctly.
–
There is no other person in the danger area.
Uncontrolled movements and vibrations
X
Never connect or disconnect hoses while the drive unit is running.
X
When the ring saw is switched on always hold the handle firmly with both hands. Thumbs
and fingers must be closed around the handles.
X
Keep the handle clean.
A loose cutting ring can cause uncontrolled vibration of the ring saw.
X
Ensure that the smooth drive rolls are fitted correctly.
2.7
2.8
2.8.1
2.8.2
2.8.3
2.8.4
2.8.5
