TYROLIT
Hydrostress AG
Page 18
Ring saw HRH500
Operation
Operating procedure
1.
Start the drive unit.
2.
Open drive unit water valve and check water delivery to ring saw.
3.
Set operating pressure.
4.
Hold ring saw firmly with both hands.
5.
Press on safety handle (A) and operate hand start lever (B).
6.
Check direction of cutting saw rotation.
WARNING
Danger of injury due to sudden recoil of ring saw.
X
Do not place the cutting ring above the centre at a work piece corner.
7.
Position the cutting ring below the centre position.
6
6.1
✓
