TYROLIT
Hydrostress AG
Page 19
Ring saw HRH500
It is more economical to achieve the total required depth of cut in a number of steps.
8.
Cutting:
–
For optimum guidance first of all make a cut from 50 to 70mm deep.
–
Divide the total depth of cut into a number of steps.
Terminating the work
1.
Close off and disconnect the water feed.
2.
Blow out water from all lines.
3.
Withdraw drive unit mains plug.
4.
Disconnect hydraulic hoses.
5.
Clean ring saw with water.
6.2
