TYROLIT
Hydrostress AG
Page 5
Ring saw HRH500
Operator (user)
As a user TYROLIT Hydrostress designates a person who independently performs the following
work:
• Setting up of machines and systems from TYROLIT Hydrostress within the scope of intended
application
• Independent execution and supervision of work
• Location of faults and instigation of fault rectification or independent fault rectification
• Maintenance
• Verify the correct functioning of the safety devices
Personnel qualifications
• Completed training as a concrete cutting specialist or relevant occupational experience
• Introduction (basic training) in the operation of the appliance by a service technician
Service technician
As a service technician TYROLIT Hydrostress designates a person who independently performs
the following work:
• Installation of machines and systems from TYROLIT Hydrostress
• Makes adjustments to machines and systems for which special access rights are required
• Complex service and maintenance work
Personnel qualifications
• Specialist professional training (mechanical / electro technical)
• Product specific training from TYROLIT Hydrostress
Organisational measures
Product monitoring obligation
The appliance must only be operated in a defect free and undamaged condition. Operating
personnel must notify immediately changes in operational behaviour or safety-related compo-
nents to a responsible person or the manufacturer.
The maintenance intervals must be adhered to. Faults affecting safety must be rectified imme-
diately.
Location of these instructions
A copy of the instructions must be available to staff at all times at the location where the appa-
ratus is used.
Workplace
X
Create sufficient free space to enable safe working.
X
Provide sufficient workplace illumination.
X
Cordon off danger area visibly so that during sawing operations no person can enter the
danger area.
2.3.4
2.3.5
2.4
2.4.1
2.4.2
2.4.3
