6 Acceptance and transport
EN Floor grinding machine FGE 250
10
12. Firmly screw in the three clamping
screws [24, Fig. H].
13. Set the machine upright.
14. Insert the assembly tool back into the machine
console [9, Fig. D].
5.3 Cleaning the machine
Observe the safety instructions in Chapter 2!
1.
Pull the power plug [16, Fig. D] from the line to
the voltage supply.
2.
Place the machine with the handle [1, Fig. A] on
the floor (
!
Fig. K).
3.
Clean and dry the bottom side of the machine
and ETX diamond tools with a cloth or suitable
agents.
4.
Set the machine upright.
5.
Clean the machine dry with a cloth or suitable
agents.
5.4 Checking electrical components
Observe the safety instructions in Chapter 2!
Only suitably knowledgeable, qualified profes
sional electricians may perform work on any
electrical parts of the machine!
Risk of fire due to faulty electrical cables!
—
Check the mains cable and power plug regularly
for functional safety.
5.5 Final tasks
—
Restart the machine if necessary
(
!
Chapter 3.1 ‐ page 7).
6 Acceptance and transport
6.1 Accepting the machine
Observe the safety instructions in Chapter 2!
The machine is delivered in a complete and
packaged condition from the manufacturer.
1.
Unpack machine and check the enclosed
delivery slip to make sure all parts are delivered.
2.
Check whether any items have been damaged
in transit.
3.
In case of damage, contact the transport com
pany immediately!
4.
Report any problems to the manufacturer imme
diately!
Complaints at a later date cannot be acknowled
ged!
6.2 Transporting the machine
Risk of injury from heavy loads!
Suspended loads can fall or tip over, causing
serious injuries!
Do not stand under suspended loads!
Raising and lowering the load must be per
formed by two persons!
Do not raise loads any higher than necessary!
Prevent the load from swinging back and forth!
Keep sufficient safety distance!
Devices for transporting the unit have to be
rated to handle its full weight and dimensions.
Observe weight data on packaging or in the ac
companying documentation!
Never walk or reach beneath the load while it is
being lowered.
Wear safety shoes!
Wear protective gloves!
Proceed with the greatest care and caution!
For longer periods in transport or in storage, the
machine needs to be covered to protect it
against soiling.