typical GT1790A, Инструкция

Страница: 46 / 85

- 43 -
No. Item Setting range Edit unit Remarks
S061 ACT timing adjustment at the start of 2
nd
bar-tacking
This item adjusts needle thread tension output start timing
at 2 nd bar-tacking section.
-5 ~ 5 1 stitch *2
S062 Number of stitches for bar-tacking at the start of
sewing
This item sets number of stitches of bar-tacking at the
start of sewing.
0 ~ 8 1 stitch -
S063
Sewing pitch for bar-tacking at the start of sewing
This item sets sewing pitch of bar-tacking at the start of
sewing.
0.00 ~ 0.70 0.05 mm *2
S064 Bar-tacking width at the start of sewing
This item sets bar-tacking width at the start of sewing.
0.0 ~ 3.0 0.1 mm -
S065 Lengthwise compensation of bar-tacking at the start
of sewing
This item sets start position of bar-tacking in lengthwise
direction at the start of sewing.
0.0 ~ 5.0 0.1 mm *2
S066 Crosswise compensation of bar-tacking at the start of
sewing
This item sets start position of bar-tacking in crosswise
direction at the start of sewing.
0.0 ~ 2.0 0.1 mm *2
S067 Bar-tacking width at the end of sewing
This item sets tie stitching width at the end of sewing.
0.1 ~ 1.5 0.1 mm -
S068 Number of stitches of bar-tacking at the end of sewing
This item sets number of stitches of bar-tacking at the end
of sewing.
0 ~ 8 1 -
S069
Lengthwise compensation of bar-tacking at the end of
sewing
This item sets start position of bar-tacking in lengthwise
direction at the end of sewing.
0.0 ~ 5.0 0.1 mm *2
S070 Crosswise compensation of bar-tacking at the end of
sewing
This item sets start position of bar-tacking in crosswise
direction at the end of sewing.
0.0 ~ 2.0 0.1 mm *2
S081
Knife motion
This item sets “with/without motion" of normal cloth cutting knife.
- - -
S083
Knife motion at 1
st
cycle of double stitching
This item sets “with/without motion" of cloth cutting knife at 1 st cycle
when double stitching is performed.
- - *2, *3
*1: Displayed according to the shape.
*2: Displayed when it is set to with edit. Refer to “V-12. Method of setting sewing data with/without edit” p.32 .
*3: Displayed when the function is selected.
Normal knife
motion OFF
Normal knife
motion ON
Normal knife
motion OFF
Normal knife
motion ON