typical GT1790A, Инструкция

Страница: 67 / 85

- 64 -
26. Communication
The sewing machine may adopt USB flash disk for
data input and output.
1) Set the mode to the communication mode
In
“V-15. Edit/check the data other than sewing data”
p.40
, refer to model screen to select communication
mode.
2) Select communication type
Press Data Change key
❼
to select
communication type.
Data Name Suffix Data Content
Parameter Data
Sewing shape, Cloth cutting length, stitch width,
and other inherent sewing data forms compiled.
Icon form data Data of compiled needle entry point.
*
Refer to the service manual for setting method of icon form data.
3) Select communication direction
Press Item Selection key
❻
to display icon A indicating
communication direction selection.
Press Data Change key
❻
to select communication
direction.
: Data shown on the operation panel is written
on the USB drive.
: Data stored on the USB drive is read into the
operation panel.