typical GT1790A, Инструкция

Страница: 76 / 85

- 73 -
VIII. List of Error Code
Error
code
Description Reset method Reset location
E001
EEP-ROM initialization of main control PCB
When no data is written into EEP-ROM, or data
is damaged, initialization of the data is
automatically informed.
Turn OFF the
power
E007 Main shaft motor-lock
When large needle resistance sewing product is
sewn.
Turn OFF the
power
E011 External media not inserted
No external media is inserted
Restart by
reset
E012 Read error
Data read from external media cannot be
performed.
Restart by
reset
Previous screen
E013
Write error
Data write from external media cannot be
performed.
Restart by
reset
Previous screen
E014 Write protection
External media is in the write prohibition state.
Restart by
reset
Previous screen
E015 Initialization error
Initialization of external media cannot be
performed.
Restart by
reset
Previous screen
E016 Insufficient capacity of external media
Capacity of external media is insufficient.
Restart by
reset
Previous screen
E017 Insufficient capacity of EEP-ROM
Capacity of EEP-ROM is insufficient.
Restart by
reset
Previous screen
E018
Wrong type of EEP-ROM
When the mounted EEP-ROM is different in type.
Turn OFF the
power
Previous screen
E019
Oversized file
Size of the file to be read is too large.
Restart by
reset
Previous screen
E020 FLASH write error
E022
File No. error
There is no designated file in the server or
external media.
Restart by
reset
Previous screen
E023 Detection of step-out of presser lifting motor
When step-out of motor is detected at the time
when presser lifting motor passes origin sensor or
starts operation.
Restart by
reset
Standard screen
E024 Oversized pattern data
When sewing cannot be performed since total
size of continuous stitching data or size of
downloaded data is too large.
Restart by
reset
Standard screen
E025 Detection of step-out of needle thread trimmer
motor
When step-out of motor is detected at the time
when needle thread trimmer motor passes origin
sensor or starts operation.
Restart by
reset
Standard screen
E026 Detection of step-out of bobbin thread trimmer
motor
When step-out of motor is detected at the time
when bobbin thread trimmer motor passes origin
sensor or starts operation.
Restart by
reset
Standard screen
E030 Needle bar upper position deviation
When needle does not stop at UP position even
with needle UP operation at the time of starting
sewing machine.
Restart by
reset
Standard screen