TYM T1003 Скачать руководство пользователя страница 79

Страница: 79 / 130

►

CHANGING THE COOLANT

(1) Open the tap in front of the gear pump to drain the coolant.

(2) Open the radiator cap at the same time.

(3) To give a thorough clean run a hose into the radiator and flush it out.

(4) Close the tap and refill the radiator with a coolant mixture of water and corrosion inhibitor or anti freeze.

(5) Start the engine and allow it to run for approx 5 minutes, check the water level again and top up

if required

Do not remove the radiator cap on a hot engine.

Allow the engine to cool down and then turn the cap slowly to ensure, that there is

no excessive pressure in the radiator.

Caution

Serious burns, can result from the contents of pressurized, hot radiators.

Allow the engine to cool down completely before opening radiator cap.

Caution

►

ANTI FREEZE

Frozen cooling water can damage the engine.

Before replacing the anti freeze solution flush the radiator.

Mix the anti freeze solution in accordance with the instructions applicable to the brand of anti freeze

and the locals climate.

Replace the solution in the radiator.

In case of loss of solution due to evaporation or overflow, replace with the original mixture ratio.

Содержание T1003



































































































































Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды

TYM T1003, Руководство оператора

Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды