TYM T1003, Руководство оператора

Страница: 49 / 130

■
Operation
For correct electronic lift use, follow the indications noted below.
– When the engine is started, indicator will illuminate
② ② ② ②
(Troubleshooting indicator), showing that the
lift internal controls are deactivated for safety reasons. The external controls on the rear mudguards
remain active.
– Set the upper lift limit with knob
③
③ ③
③
and move the lift control lever
①
① ①
①
to the lifting position (A) to
re-activate the internal cab controls. Indicator
② ② ② ②
will switch off and indicator
⑤ ⑤ ⑤ ⑤
will illuminate.
48
re-activate the internal cab controls. Indicator will switch off and indicator will illuminate.
■
Transit safety lock
To activate the transit safety function, proceed as follows:
– Before activating the function, raise the implement by shifting lever
①
① ①
①
to the raising position (A)
– Turn the arm descent speed adjustment knob
④ ④ ④ ④
fully counterclockwise and lock in the raising position.
– Block the lever in the raising position by pushing the locking push button
⑥
⑥ ⑥
⑥
forwards
Caution
If lever is already in lifting position (A), it must be moved to the neutral position
(central STOP position) and then to the lifting position (A).
■
Swing damping
– To activate the device, move lever
① ① ① ①
to raising position (A), and press switch
⑧ ⑧ ⑧ ⑧
. Indicator
⑨ ⑨ ⑨ ⑨
lights
up to show that the function is activated.