TYM T1003 Скачать руководство пользователя

Страница: 44 / 130

►

THROTTLE LEVER (Hand Operated Throttle Lever)

The hand operated throttle lever is located to the right side of

the Lever/Switch panel and controls the speed of the engine.

Move the Throttle Lever to increase or decrease the engine speed.

■

To increase the engine speed, Push the lever

Upwards.

■

To decrease the engine speed, Pull the lever

Downwards

The lever can be left in any position between idle and

maximum as required.

►

REMOTE HYDRAULIC VALVE LEVERS

Attachment controlled by the Remote levers.

The lever is used when operating a hydraulically operated

implement.

The associated outlets are fitted with female quick release

couplings and are located on the Rear side of the Machine.

Move the hydraulic remote control lever up or down as

required to operate the implement. The central position of

the lever is neutral.

■

When Connecting or Disconnecting the Couplers to attach the Implement

– Connecting

1.Clean both couplers.

2.Remove dust plugs.

3.Insert the implement coupler to the tractor hydraulic coupler.

4.Pull the implement coupler slightly to make sure couplers

are firmly connected.

– Disconnecting

1.Lower the implement first to the ground to release hydraulic

pressure in the hoses.

2.Clean the couplers.

3.Relieve pressure by moving hydraulic control levers with engine

shut off.Pull the hose straight from the hydraulic coupler to release it.

4.Clean oil and dust from the coupler,then replace the dust plugs.

Содержание T1003



































































































































Результаты поиска

Содержание T1003

Отзывы:

Похожие инструкции для T1003

Бренды по названию

Популярные бренды

TYM T1003, Руководство оператора

Результаты поиска

Содержание T1003

Отзывы:

Похожие инструкции для T1003

Бренды по названию

Популярные бренды