TYM T1003 Скачать руководство пользователя страница 41

Страница: 41 / 130

►

BRAKE PEDAL

Caution

A connecting latch is provided to connect the right and left brake pedals for high

speed or road use. In the interest of safety always use it on the road or at high speed

as using one side only can cause rollovers.When servicing the tractor ensure that the

adjustment on both sides in the same.

■

Left and Right Turn Brake Pedals

– Disconnecting the pin

The left and right turn brake pedals assist when making

tight turns in a field. Use these pedals in conjunction

with the steering wheel.

■

Master Brake

– Connecting the Pin

The Brake Pedal Connecting pin is used to lock the

brake pedal together.

For Road operation the pedals must be locked together.

Connection

Disconnection

►

PARK BRAKE (Hand Operated Park Brake)

1. Pull the Lever fully up to engage the park brake.

2. Press the button on the end of the lever and lower the lever to

release the brake.

Traveling with the park brake on will damage the brakes.

important

►

To avoid personal injury:

○

When you leave the tractor,be sure to apply the parking brake and stop the engine

○

In applying the brakes:

-The torque of wheel axle is extremely high while creep speed is being used.Be sure to step down

on the clutch pedal completely before applying the brakes,or they will not work.

-When starting to operate the tractor,be sure to release the parking brakes.Misuse of the brakes may

cause damage to the transmission and is therefore not acceptable to TYM for coverage under the

warranty.

Содержание T1003



































































































































Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды

TYM T1003, Руководство оператора

Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды